How to Turn On Luclin Elementals Back On After Turning Them Off

[purist]

I turned off the Luclin elemental models in the Options screen by unchecking the "Horses and Elementals" box a long time ago. Recently, I changed my mind and decided I wanted the Luclin elemental models back after all, so I went to the Options screen and checked the box. Then I tried logging in, but the old elemental models still display. I already tried looking at the eqclient.ini file in directory, and it says LuclinElementals=TRUE. The old models are still displaying.

This is strange. Is there any way to get Luclin elemental models back or do I have to reinstall?

[Mcbard]

Is there an option to set Luclin Horses in your eqclient.ini? If so, make sure that is set to "TRUE" and see if it works.

[purist]

I'll make sure its set to TRUE when I get home but it probably already is since the elementals one was, either way I will let you know whether that did the trick, thanks Mcbard

[Engraverwilliam]

Im having a similar thing. i installed on my big box (the one my GF plays on) then I copied the directory to a flash-drive and copied it onto a laptop (the one i play on) On hers you can see the new elementals (dig the new ones btw!) on the laptop , it displays the old model. I have compared the .ini files they are the same.

[purist]

Is there an option to set Luclin Horses in your eqclient.ini? If so, make sure that is set to "TRUE" and see if it works.

No option for horses, just checked. Ty though.

[purist]

Halp meh!

[Cyrius]

"UseLuclinElementals=FALSE" set it to TRUE
also you probably have to check if this "AllLuclinPcModelsOff=FALSE" is not TRUE since it would probably overwrite all other options.

[purist]

"UseLuclinElementals=FALSE" set it to TRUE
also you probably have to check if this "AllLuclinPcModelsOff=FALSE" is not TRUE since it would probably overwrite all other options.

Thanks Cyrius, I just checked and I had both of those settings. I think I might just re-install over the weekend at this point.

[kinztz]

I would reformat, just incase.

[purist]

I just re-installed. For some reason, it didn't fix the problem.

[purist]

Could deleting/replacing a .s3d file possibly be the answer here?

[purist]

Any ideas? 500p reward!

[Uthgaard]

A reinstall doesnt fix anything setting related. If you look at your everquest folder after a reinstall, it leaves all of your non-system files intact. Delete the entire folder after uninstalling to start fresh.

[purist]

A reinstall doesnt fix anything setting related. If you look at your everquest folder after a reinstall, it leaves all of your non-system files intact. Delete the entire folder after uninstalling to start fresh.

Here's what I did.

1. Used CC Cleaner to run the Everquest Titanium uninstaller.

2. Deleted the entire "Program Files\Sony" folder.

3. Re-installed, following the setup guide and upgrading textures and such.

Boot up EQ, make sure "Elementals and Horses" was checked (it was) and log in and summon up a pet, and it's still the old model.

God hates me.

[Arkanjil]

I'll look into it and see what i come up with.

[purist]

So, I uninstalled, deleted my C:Program Filesx86/Sony/Everquest directory, and then re-installed Titanium on an entirely different hard drive. I then do the graphics update and boot up EQ and summon up a pet, still old models. I give up.

[purist]

So, I figured out how to fix this.

Just install Titanium on a new partition and Elementals will be Luclin again.

Strangely, uninstalling Titanium and deleting Sony folder + reinstalling Titanium on the same hard drive doesn't fix it. You have to install it on a new partition.

[SirAlvarex]

Hm. I just changed the eqclient.ini, then checked the options under the eqemu launcher (which were correct), and then saved them. Luclin models are showing up for me.