Project 1999

Project 1999 (/forums/index.php)
-   Technical Discussion (/forums/forumdisplay.php?f=40)
-   -   Multiple Core Issue? (/forums/showthread.php?t=116776)

Mingo 07-30-2013 12:46 PM

Multiple Core Issue?
 
When I try to initialize EQ through EQEmuLauncher or WinEQ it closes. Both of these programs set core affinity.

When I turn the affinity off in EQEmuLauncher i can open EQ, load into game (but then, i have the core issue, and cannot play)

When I launch EQ with the cmd affinity 1 as Nilbog has suggested, EQ wont launch. When i take this out of the filepath, EQ will launch, but then, again, unplayable.

This all started with the WinEQ change last night.



--------------------------------

I have reinstalled EQ. I have updated drivers for graphics, chipset and all MB drivers. I have reinstalled WinEQ. I'm not sure what to test next, any ideas? A lot of people had this issue last night, i bet some of them have fixed it and have an answer.

Deanob 07-30-2013 12:54 PM

Intel or AMD? and which model?

A lot of these issues are solved/fine when running Windows 7 with latest updaes and launching EQ normally via eqgame.exe patchme target command.

Mingo 07-30-2013 01:03 PM

Windows XP. AMD processor.

SwordNboard 07-30-2013 01:28 PM

http://www.project1999.org/forums/showthread.php?t=3609

Mingo 07-30-2013 01:49 PM

Thankyou. Yes, i've tried all of those and the AMD drivers that work on multiple core issues. None have worked. That was where i looked first.

So.. while Red99 was down i logged into other EQEmus to chat with pals. For these other EQEmus i have another EQ directory. WinEQ was able to open EQ from this directory, fine. So i moved the EQchanges into this folder and now WinEQ will not open it.

Must be something in these changes that's causing this error for me?

I did a system restore, a couple of times, with a couple of tests. WinEQ after the July 27 patch fights something in the dsetup.dll from that July 14th patch for Red99 changes.

They are now not compatible on my machine.

nilbog 07-30-2013 02:08 PM

I don't have any issues with wineq2 after they repatched.

Are you running everything as administrator?

Mingo 07-30-2013 02:24 PM

My only user is setup as admin, so i would assume i am by default?

Mingo 07-30-2013 02:28 PM

went ahead and opened WinEQ with Run As (admin) and same result. fyi

nilbog 07-30-2013 02:29 PM

If open, close wineq in your tray.

While holding SHIFT, right click your shortcut for wineq, and choose run as administrator.

Mingo 07-30-2013 02:31 PM

tested that, too, no dice. can still click EQ, WinEQ2.0 Default Profile, hour glass for half a second, then nothing opens.


All times are GMT -4. The time now is 10:46 AM.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.