Can not install
 

Hey guys,

I had to format and reinstall windows and now I am having a problem installing EQ Titanium client.

I have the 5 install CD's and I load the first one and start the installation. I get all the way to the 5th disk and I get an error:

Component Transfer Error

Component: Titanium
File Group: EQ Files
File: D:\data6.cab
Error: Data Error (cyclic redundancy check)

There is only an OK button which, when I hit it, uninstalls all files and install wizard disappears.

The error is always with the D:\data6.cab file

I have used these disks to install before with no issues

I have done a check disk and defrag

I have made sure there is no EQ files on the computer before installing

Any more suggestions? Can I get the D:\data6.cab from somewhere else to get by this error?

Any help would be appreciated

Sounds like its a physical problem with the cd, sorry if its silly to ask but have you cleaned it thoroughly?

If so, I might recommend using a program like IMGburn to take an image of that disk and see if you can install it with that. Sometimes you can get around those errors by re-creating the cd. Let me know if both of those options fail and what comes of it!

Thanks,

The disk is a slightly scratched but nothing bad. Its not dirty either. I will use my macbook and use toast to do the Disk recovery disk cache and re-burn the disk. Ill let you know how it goes!

Also, since my windows is just on a bootcamp partition on my mac I am going to wipe it again and format/reinstall windows then try to new disk.

Well the recovery didn't work. It said that it was having a problem recovering the data6 file but it was able to partially restore it. I have gone through my drives and found an iso for CD 5 and I am going to burn an new image and try again.

Sweet it worked. Thanks again

No problem be safe!

Damn...spoke to soon

Now I am getting the error "No 3D device found"

I have updated my VGA drivers and installed directX

Any other ideas?

In your device manager what do you have listed as your graphics adapter currently?

Standard VGA Graphics Adapter

Install directx 9.0c - www.microsoft.com/directx and choose other versions. nm didn't see the total post