Project 1999

Project 1999 (/forums/index.php)
-   Off Topic (/forums/forumdisplay.php?f=19)
-   -   Burning mill ends in my new wood stove? (/forums/showthread.php?t=369402)

Topgunben 10-10-2020 12:15 AM

Burning mill ends in my new wood stove?
 
Just put a wood stove in my place. I like the idea of burning mill ends because they are cheap, stack easy and come debarked. But I've heard varying reports and opinions that mill ends can cause a lot of harm to a chimney and stove. Some say there are chemicals in KD wood that can eat away at the liner of a chimney pipe. Others say that they've been burning mill ends for decades without issue.

Anyone with experience care to chime in?

douglas1999 10-10-2020 01:04 AM

When wood air-dries naturally not only does water leave but other substances break down over time through oxidization. If green wood is dried rapidly, the water leaves but other substances remain that would normally dissipate with a natural air dry. I can't speak to how more or less corrosive they are to metal when burned though. My guess would be that it's negligible. Maybe you'd have to replace the chimney every 15 years instead of 20?

bubur 10-10-2020 02:27 AM

osha senses tingling

if you owned your home before you decided to kill yourself, i dont see any legal issues

hobart 10-10-2020 02:40 AM

Quote:

Originally Posted by Topgunben (Post 3192437)
Just put a wood stove in my place. I like the idea of burning mill ends because they are cheap, stack easy and come debarked. But I've heard varying reports and opinions that mill ends can cause a lot of harm to a chimney and stove. Some say there are chemicals in KD wood that can eat away at the liner of a chimney pipe. Others say that they've been burning mill ends for decades without issue.

Anyone with experience care to chime in?

Hillary Clinton and Hunter Biden are coming for your guns. You can't be too prepared.

You just need a mounted jackalope head and a broken washing machine for your front porch.

Izmael 10-10-2020 07:10 AM

Most planks and such are made out of conifers.
Conifers don't mix well with wood stoves unless you know what you are doing.

Other wood types can also have additives (anti rot, anti ibsect, anti fire, etc) and will burn badly and/or release bad stuff in the air.

Stick with good old oak/similar firewood and seize the workout opportunity of hauling it around, sawing/splitting where applicable.

douglas1999 10-10-2020 11:31 AM

That's true burning conifers creates creosote rapidly. Creosote buildup is what can cause chimney fires, nevermind metal fatigue.

Topgunben 10-10-2020 11:49 AM

Quote:

Originally Posted by douglas1999 (Post 3192503)
That's true burning conifers creates creosote rapidly. Creosote buildup is what can cause chimney fires, nevermind metal fatigue.

Here in the PNW most people burn Doug fir exclusively. The key to avoiding creosote seems to be only burning seasoned wood, not just dry.

With all that said, I think I’ll avoid mill ends. Just doesn’t seem worth the risk to save $60 a cord.

douglas1999 10-10-2020 01:16 PM

Oh man that must smell campfirey, not that it's a bad thing. Go out and get some walnut if you can, smells amazing!

Toad1 10-10-2020 01:41 PM

i wish it was cold enough to put in a stove and burn wood, fucking 90 in florida still

Topgunben 10-10-2020 05:18 PM

Quote:

Originally Posted by Toad1 (Post 3192533)
i wish it was cold enough to put in a stove and burn wood, fucking 90 in florida still

its 57 degrees here in SW washington today. But I live up in a higher elevation area so it I get a lot of snow and it can get down to 20 degrees sometimes. Which is not super cold compared to most places, but still cold nonetheless.


All times are GMT -4. The time now is 02:04 AM.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.