Quote:
Originally Posted by Beinen
[You must be logged in to view images. Log in or Register.]
To be honest, I don't know what I need to do with this once I get into my Ubee DDW36C modem's firmware.
Local IP
Local Start Port
Local End Port
External Start Port
External End Port
Protocol TCP UDP BOTH
This is what I need to fill in.
|
Local IP: The internal (192.168.*.*) IP of your computer
Local Start Port: Same as External Start Port
Local End port: Same as External End Port
External Start Port: 7000
External End Port: 9000
Protocol: Both is safest, but EQ uses UDP for most stuff if you're concerned
If you don't want to open up 7151-8999 (which aren't needed), you can make two separate rules, one for ports 7000-7150 and one for port 9000