#1
|
|||
|
You have been disconnected
I recently installed Titanium and rolled a cleric on the proj1999 Kunark server. I have been getting disconnected every 2-15 min over the course of last night and this morning / early afternoon. I want to say about 40-50 total DC's.
I have free2play installed and i had similar problems with disconnects when i first started playing that a month ago, but somehow i managed to make it play well with my hardware/software. I installed Dx9c, the M$ KB patch to fix game crashes KB2488113-x64. For project 1999 / EQEmu I've tried:
Attached is my Speccy hardware/software profile. Attached is my dbg.txt Attached is my eqclient.ini Sometimes mid-fight I'll stop hitting/missing a mob when i have auto-attack on, and then about 30 seconds later I start swinging again. Sometimes I'll run and mobs are still focusing on the spot i used to be, I can tell I've lost connection and my client stopped telling the server where i went. I will notice I DC'd when i cast a spell and the spell gems aren't lighting back up. The sense heading macro that is bound to my a/d key will tell me i can't do that while casting even though the casting should have ended already. I notice a red asterisk by the net meter (see attached). not sure if it means anything. Not sure what else to try really.. read a ton of posts, googled every error message I could think of. The few lines in the dbg.txt file stand out to me the most: 2013-06-08 14:22:38 Item done, MSG_WEATHER_EVENT received. 2013-06-08 14:22:38 2013-06-08 14:24:20 D3DXCreateTextureFromFileEx() failed to create texture spela2.tga for particle system. 2013-06-08 14:24:20 Item done, MSG_WEATHER_EVENT received. 2013-06-08 14:24:20 2013-06-08 14:24:20 D3DXCreateTextureFromFileEx() failed to create texture spela2.tga for particle system. 2013-06-08 14:24:20 D3DXCreateTextureFromFileEx() failed to create texture spela2.tga for particle system. 2013-06-08 14:24:45 Item done, MSG_WEATHER_EVENT received. 2013-06-08 14:24:45 2013-06-08 14:28:50 Networking: connection terminated [client:DisconnectReasonOtherSideTerminated,server: DisconnectReasonNone] 2013-06-08 14:28:50 disconnected at C:\EQ\EverQuest\EverQuest.cpp:18228 (char. select) DisconnectReasonOtherSideTerminated,DisconnectReas onNone 2013-06-08 14:28:50 2013-06-08 14:28:50 Character is Thodar. 2013-06-08 14:28:50 2013-06-08 14:28:50 YOU HAVE BEEN DISCONNECTED. 2013-06-08 14:28:51 2013-06-08 14:28:51 end of DisplayScreen 2013-06-08 14:28:51 2013-06-08 14:29:20 Networking: Connection Closed [0] with 2928 pending bytes. 2013-06-08 14:29:20 Attempt to send message 29547 on a void connection. 2013-06-08 14:29:20 Cleaning up groups. 2013-06-08 14:29:20 Attempt to send message 3702 on a void connection. 2013-06-08 14:29:20 Stopping world display. 2013-06-08 14:29:21 Attempt to send message 30546 on a void connection. 2013-06-08 14:29:21 Cleaning up. 2013-06-08 14:29:21 Sending Logout. 2013-06-08 14:29:21 Attempt to send message 3942 on a void connection. 2013-06-08 14:29:21 Networking: using port [56451]. 2013-06-08 14:29:21 Networking: Connection Established [1] 2013-06-08 14:29:21 WorldAuthenticate: Initiating Login. Any help is very much appreciated!! Regards, Paul | ||
#2
|
|||
|
I believe this issue has been resolved. I disabled my killer / bigfoot network adapter in start > run > ncpa.cpl and have been using my on-board realtek nic. I have experienced no crashes since this morning, after the change was made.
| ||
#3
|
|||
|
I'm guessing you had more than one network adapter on this pc/laptop?
just curious, are you on wireless?
__________________
Having problems running EQ? Please visit the Tech Discussion forum and read my FAQ before posting:
http://www.project1999.org/forums/sh...ad.php?t=94928 | ||
#4
|
|||
|
Yea on my PC i bought this sick $90 network card, but sadly it's cause more problems than anything - didn't even support Wake On Lan lol
Nope all wired. I use my static IP on my Killer NIC for file sharing from my mac and to remote in from work so I just need to setup the realtek to be static and change some port fwd's and I should be fine using just this NIC. If i forget to disable the killer NIC before running EQ.. EQ will certainly remind me. I am however getting some weird behavior with auto attack.. I'm pretty sure it's lag related. Like if a mob moves, his HP bar stops updating for me and I stop auto attacking and only when I target myself or something else and then re-target the mob will i resume auto attacking.. I fraps'd it, I'll try to get it uploaded to youtube by tonight. | ||
#5
|
|||
|
I have a couple other examples recorded where the auto attacking stops mid-fight, but I need to edit those a little.. lots of fluff in the middle.
This video is just shows the spider sitting there while i walk around it with auto attack on and only when i switch targets back and forth do I start attacking it. (Video still uploading) | ||
#6
|
|||
|
Search these forums "overclock"
You may be overclocked and don't realize. | ||
#7
|
|||
|
I think that did it! Been playing Monk for about an hour or so and not a single hiccup with positioning / melee! Thanks very much!!
I used catalyst control center to disable it form within windows. no need to mess around with bios / setup utility. | ||
|
|