Quiver Haste

[Jify]

Doesn't seem to be working on the server. Checked EQEMU forums, same deal:

http://www.eqemulator.net/forums/showthread.php?t=25010&highlight=quiver

:)

[Aeolwind]

Right, Quiver haste was not added till Velious.

[Jify]

Thanks Aeol! 8D

[nilbog]

http://www.project1999.org/forums/showthread.php?t=166&highlight=quiver

[Jify]

Thanks Nil 8)

[Reiker]

So quivers were nothing more but a really bad choice of container in classic? Sweet!

[nilbog]

Setting these up to function again in mid-Velious.

Does this list look correct?
fleeting quiver 60
tailored quiver 22
thunderhoof quiver 33
quiver 20

I was mostly concerned about 'Quiver'. Did the storebought 'Quiver' have 20% in Velious?

[YendorLootmonkey]

Those are the weight reduction amounts. The haste amount was known to be a third of the weight reduction of the quiver, which is confirmed here:

http://www.zlizeq.com/Game_Mechanics-Stats,_Resists_and_Mods

Tailored Quiver at 22% WR and Quiver at 20% WR confirmed here:

http://www.monkly-business.net/forums/showpost.php?p=96731&postcount=2

Fleeting Quiver at 60% WR (i.e. 20% haste, stackable with worn/spell haste) confirmed here (page copyright 2001):

http://home.roadrunner.com/~less3d/eq/_private/Taloring/tailoring.html#fleeting_quiver

[nilbog]

Those are the weight reduction amounts. The haste amount was known to be a third of the weight reduction of the quiver, which is confirmed here:

http://www.zlizeq.com/Game_Mechanics-Stats,_Resists_and_Mods

Tailored Quiver at 22% WR and Quiver at 20% WR confirmed here:

http://www.monkly-business.net/forums/showpost.php?p=96731&postcount=2

Fleeting Quiver at 60% WR (i.e. 20% haste, stackable with worn/spell haste) confirmed here (page copyright 2001):

http://home.roadrunner.com/~less3d/eq/_private/Taloring/tailoring.html#fleeting_quiver

Good info. Will make sure this is working properly.

Will move ahead with 6.66%(lol) haste on the quiver then. Unless other research is found to dispute it.

[nilbog]

These should be gtg ~05/2001

float temp_wr = (pi->GetItem()->BagWR / 3);