Log in

View Full Version : Laptop Issue *updated info* HELP!


chrismed
02-24-2011, 10:49 PM
Ok will give you the system information, explain the problem and then let you know what I have done so far to try to fix the problem. Hopefully someone has a suggestion.....

System Information:

PC Wizard 2010 Version 1.961
----------------------------------

Owner: Microsoft
Organisation: Microsoft
User: ******
Computer Name: *******
Operating System: Windows 7 Home Premium Home Edition Media Center 6.01.7601 Service Pack 1
Report Date: Thursday 24 February 2011at 20:10

------------------------------------------

<<< System Summary >>>
> Platform : Intel Calpella
> Mainboard : Dell 0G62V9
> Chipset : Intel HM57
> Processor : Intel Core i3 370M @ 2400MHz
> Physical Memory : 4096MB (2 x 2048 DDR3-SDRAM )
> Video Card : ATI Mobility Radeon HD 4650
> Hard Disk : Western Digital WD5000BEVT-75A0RT0 (500GB)
> DVD-Rom Drive : PLDS DVD+-RW DS-8A5SH
> Monitor Type : Nissei Sangyo No Monitor -
> Monitor Type : NPFT8156AT - 15 inches
> Network Card : Broadcom BCM4313 802.11b/g LP-PHY
> Operating System : Windows 7 Home Premium Home Edition Media
Center 6.01.7601 Service Pack 1 (64-bit)
> DirectX : Version 11.00
> Windows Performance Index : 5.7 on 7.9

-------------------------------------------
***** End of report *****


This is the problem:


- Acts like there are pixels that glitch, randomly flicker. Usualy along edges of things

- It isn't the Dual or Quad glitch

Here is a picture of it:

http://sanoora.embarqspace.com/communities/7/004/008/535/627/images/4541597393.png

This is what I have done so far:


- Installed the latest Video Driver

- Installed DirectX End User (for the prev ver of DirX instead of just DirX 11)

- Checked to see if it was a CPU or GPU heating prob (the new laptop has no problems running the game as far as resource wise.. taking very little of the CPU and GPU to run it according to the performance monitor)

PC Wizzard shows the CPU and GPU running as follows while running the game:

While Running EQ
-----------------
*CPU*
Core 1 & 2 = Average Temp is 57C
(Task manager shows only Average 5% CPU being used)

*GPU*
Average Temp 69C

Both hold pritty steady while running EQ

When not running EQ
---------------------------

*CPU*
Core 1 & 2 Average Temp 47C

*GPU*
Average Temp 56C

Again both hold pritty steady at these temps

- Disabled Intel Speedstep and tested it

- Tried the Compatability Mode and get greeted with errors (after research I read that the new Intel Chips doesn't support and you get errors when you try to use compatability mode)

- Used this in the Shortcut to the program:

C:\Windows\System32\cmd.exe /C start /AFFINITY 2 C:\Project1999\eqgame.exe patchme

Watched with task manager to make sure the affinity was set to one core (it was) so this worked well as far as doing what it was suppose to (but not with helping the problem)

Not sure what else I can possibly do to correct this problem on my wifes Laptop which is brand new....
HELP!!!
Any suggestions?
( on how to fix the issue besides slaming it against the wall :D )
Thanks

strupp
02-24-2011, 10:59 PM
uhm im not ingame atm so i cant check what it was called

but i had the same problem when it was raining in some zones.

when you go into the options menu and into the box where you change your resolution, try disabling the Shaders (i think there are 3?)

worked for me

to quote myself from another thread:
i turned all the pixel shaders and advanced lightning off and it worked had the same problem with my HD 4670

(got a 5770 now and no problems)

(in my experience it only occured in some zones, and most of the times when it rained i think)

hope that helps

chrismed
02-24-2011, 11:19 PM
I went under Options/Display/Advanced and turned all of them off. Then I zoned *says some things won't take affect till you zone*

Will try again but actualy log out and log back in after I change.. will try and edit this post in a min to let you know if it worked.

***UPDATE***
Ok, looks like I might have had to log out and log back in when I change those 3 settings. Once I logged back in after turning the picel shaders off and camping completely out, Water looked plain (oh well) but after running around for 5 mins or so.. zoning in to another zone and running around for a little bit.. looking all around to try to make it happen.. I didn't see the same glitches I had before.
NOW THOUGH... I'm not letting my guard down just yet. At times it does it alot.. sometimes it does it very little.. almost making me think I had fixed it before ROFLMAO!!!... but I will keep an eye out and post more if it does it again.. this is a GREAT fix for laptops if this works.