Can not install

corradojeff · #1 08-17-2010, 04:04 PM

Hey guys,

I had to format and reinstall windows and now I am having a problem installing EQ Titanium client.

I have the 5 install CD's and I load the first one and start the installation. I get all the way to the 5th disk and I get an error:

Component Transfer Error

Component: Titanium
File Group: EQ Files
File: D:\data6.cab
Error: Data Error (cyclic redundancy check)

There is only an OK button which, when I hit it, uninstalls all files and install wizard disappears.

The error is always with the D:\data6.cab file

I have used these disks to install before with no issues

I have done a check disk and defrag

I have made sure there is no EQ files on the computer before installing

Any more suggestions? Can I get the D:\data6.cab from somewhere else to get by this error?

Any help would be appreciated

Anaiyah · #2 08-17-2010, 04:43 PM

Sounds like its a physical problem with the cd, sorry if its silly to ask but have you cleaned it thoroughly?

If so, I might recommend using a program like IMGburn to take an image of that disk and see if you can install it with that. Sometimes you can get around those errors by re-creating the cd. Let me know if both of those options fail and what comes of it!

corradojeff · #3 08-17-2010, 05:13 PM

Thanks,

The disk is a slightly scratched but nothing bad. Its not dirty either. I will use my macbook and use toast to do the Disk recovery disk cache and re-burn the disk. Ill let you know how it goes!

Also, since my windows is just on a bootcamp partition on my mac I am going to wipe it again and format/reinstall windows then try to new disk.

corradojeff · #4 08-17-2010, 05:40 PM

Well the recovery didn't work. It said that it was having a problem recovering the data6 file but it was able to partially restore it. I have gone through my drives and found an iso for CD 5 and I am going to burn an new image and try again.

corradojeff · #5 08-17-2010, 06:41 PM

Sweet it worked. Thanks again

Anaiyah · #6 08-17-2010, 07:00 PM

No problem be safe!

corradojeff · #7 08-17-2010, 07:47 PM

Damn...spoke to soon

Now I am getting the error "No 3D device found"

I have updated my VGA drivers and installed directX

Any other ideas?

Anaiyah · #8 08-17-2010, 07:56 PM

In your device manager what do you have listed as your graphics adapter currently?

corradojeff · #9 08-17-2010, 07:59 PM

Standard VGA Graphics Adapter

Savok · #10 08-17-2010, 08:55 PM

Quote:

Originally Posted by corradojeff [You must be logged in to view images. Log in or Register.]

Damn...spoke to soon

Now I am getting the error "No 3D device found"

I have updated my VGA drivers and installed directX

Any other ideas?

Install directx 9.0c - www.microsoft.com/directx and choose other versions. nm didn't see the total post